منتدى ايجي فون

كل ما يخص عالم المحمول و البوكسات
 
الرئيسيةالرئيسية  اخر التحديثات  مكتبة الصورمكتبة الصور  بحـثبحـث  الأعضاءالأعضاء  التسجيلالتسجيل  دخولدخول  

إرسال موضوع جديد   إرسال مساهمة في موضوع
شاطر | 
 

 Octoplus JTAG PRO Software v.1.3.4 is out!

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
Mohamed Loly
المدير العام
المدير العام
avatar

تاريخ التسجيل : 17/03/2017
المشاركات : 123
العمر : 22
معدل تقييم المستوى : 10562

مُساهمةموضوع: Octoplus JTAG PRO Software v.1.3.4 is out!    الجمعة مارس 31, 2017 6:13 pm

Octoplus JTAG PRO Software v.1.3.4 Release Notes:


  • Sony Factory Repair feature has been released!

اقتباس :
You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported)
This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing.
Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.

  • Added support for the following models via eMMC:

اقتباس :

  • Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
  • Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
  • Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files


  • Added support for the following models via USB:

اقتباس :

  • OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files


  • Added possibility to set extended options for boot operation mode.
    From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode»



  • Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations

اقتباس :
To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software

  • Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware.
    Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions



  • Uploaded Full flash for Huawei G620S-L01 into the Support Area


  • Uploaded new “Live logs” into the Support Area


  • Added more detailed operations’ logging


  • Improved work (parsing) with pit files


  • All pinouts and Repair procedures described in the manual ("Help" button in the software)


* Note: device should have non-damaged native TA; otherwise device will not be repaired


More info and discussion are HERE
_________________________________________
WBR,
Octoplus Box Team
الرجوع الى أعلى الصفحة اذهب الى الأسفل
 
Octoplus JTAG PRO Software v.1.3.4 is out!
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:تستطيع الرد على المواضيع في هذا المنتدى
منتدى ايجي فون :: قسم أخبار وإعلانات المنتدى :: أخر أخبار وتحديثات GSM News & Updates-
إرسال موضوع جديد   إرسال مساهمة في موضوعانتقل الى: